Forums/
Business Routers (Standalone)
2020-02-13 13:53:59
@paolo-m Check if it works with another subnet. The subnet used ranges from 192.168.1.1 to 192.168.1.254 If you now want to expand the network and want to reach 192.168.2.1, the subnet 255.255.0.0...
0HELPFULS
Forums/
Business Routers (Standalone)
2020-02-13 13:47:50
@Andone Thanks so lot. I have now set everything up so far. VLAN 1 (default) Router: 172.16.10.1 Switch: 172.16.10.2 Now I have set up two VLan's. I followed the instructions you suggested. VLAN20:...
0HELPFULS
Forums/
Business Routers (Standalone)
2020-02-12 22:45:51
@Andone Thank you for your prompt reply My configuration: ER6020: Port 1 (WAN) : Modem from the ISP with static IP 5.10.175.145 Port 5 (LAN) : T1600G The IP-Address is 172.16.10.1 (static) T1600G:...
0HELPFULS
Forums/
Business Routers (Standalone)
2020-02-11 00:35:21
I use an ER6020 (router) and a T1600G-28PS (switch). The modem (with a static IP) from the internet service provider depends on port 1 (WAN) of the router. The T1600 hangs on post 5 (LAN) of the...
0HELPFULS
Forums/
Business Switches (Standalone)
2019-05-17 16:59:33
Is it possible to set the speed of the fan? Even without load (PoE) the fan runs very fast and generates a lot of noise.
0HELPFULS
Forums/
Business Switches (Standalone)
2019-05-17 16:57:53
[German] Ist es möglich, die Drehzahl des Lüfters einzustellen? Selbst ohne Last (PoE) läuft der Lüfter sehr schnell und erzeugt viel Lärm. [English] Is it possible to set the speed of the fan? Even...
0HELPFULS