Model : Hardware Version : Firmware Version : ISP : So I've configured two of my current CPEs on this link I'm testing to be accessible remotely (off-site) by forwarding their server TCP ports...

I'd try lowering the MCS mode down a notch, perhaps to MCS7/12 in both ends of the link just to give a couple of dB the chance to kick in and take that max tx rate closer to the actual rate...

...so given the fact that I'm actually facing a similar issue over the last couple of days whereas my 2 CPE510s used to be rock solid for quite some time beforehand I'd feel inclined to bring up an...

I was in the exact same situation a few weeks ago until i figured it out. So assuming you have 2 CPEs, having assigned static IPs first one is for example 192.168.1.11 and the second 192.168.1.12....

alternatively you may use this tool made possible using GoogleMaps, https://airlink.ubnt.com, which i find really suitable for such pre-considerations. Hope it helps (it did in my case), along with...

No matter what app I'd use, either the new or the old I'd get the exact same end result..The app would call it a success and on the next screen I would still get the 2012 firmware. In any case I...