Model : TL-SG2008 Hardware Version : V1 Firmware Version : 1.0.3 I have 3 TL-SG2008 switches, daisy-chained (router - A - B - C). The second switch has a guest wifi AP on port 8 (B8). The AP is...

The smart switch is connected to a unmanaged switch (other floor) which has one single uplink cable to the router. So only one router LAN port is connected. All VLANs pass through that one single...

Only one vlan goes through the switch uplink (port 1). AP is on port 8. All router ports behave the same way because that's easier to configure (but only one router LAN port is connected). Still the...

abailey wrote If you are using one port on the router to connect to the switch but are running multiple VLAN's through it, then you need Port 8 to be in VLAN9 set to untagged (as you have it), and...

Region : Netherlands Model : TL-SG2424 Hardware Version : V1 Firmware Version : ISP : I’m new to smart switches and vlans so I’m looking for some advise on how to configure my setup. I have a...