@ExcellGroup Oh god, been there and dealt with that! Good luck mate! As you say if you could get onto it remotely you could play around with settings. Personally never used GFast but cant see it...

@Richard17 Hey The link below will tell you how to switch to access point mode, but I would only recommend doing that if you can run some sort of cable between the devices. It basically disables the...

@Nelkram If you have changed the username and password from the default printed on the bottom of the device, then your only real option is to hold the RESET button on the device. This will reset it...

@T-CO If you are after easy to configure, I would not be buying another router (AX10 / AX20 / AX50). Ideally what you are after is an access point. You have 2x options 1. The WA1201 will work for you...

@ppdb Deco models can be mixed as you feel appropriate You don't have to get the same model, but if you need to connect this via the power line, you might need to look at the Deco P9. However if you...

@Richard17 Hey The Deco P9 uses both WiFi and PLC backhaul, usually the PLC is the preferred method However like most powerlines technology this has limitations on the speed it can transfer and...