Forums/
Deco
2021-04-27 22:20:24
@NanoG6 I would first verify in the app to make sure you are connected to the node you intend to connect to. If your device happens to be connected to the furthest node, disable and enable your Wi-Fi...
0HELPFULS
Forums/
Deco
2021-04-27 21:18:19
@will_r It seems some users connect via Ethernet to one network and Wi-Fi to another: https://discourse.pi-hole.net/t/trying-to-use-wifi-and-ethernet-with-pihole/3066
0HELPFULS
Forums/
Range Extenders
2021-04-27 20:58:51
@Psonbre The extender does not need port forwarding. If the extender was actually a router, then you would do double port forwarding, but not this case. What needs to be done is you need to find out...
0HELPFULS
Forums/
Range Extenders
2021-04-27 18:17:56
@LLT When the extender is first booted up and not configured it will broadcast a wireless network that does not have a password. You need to configure the extender where it will then use the wireless...
0HELPFULS
Forums/
Deco
2021-04-27 18:08:39
@GibbonB79 Try disabling fast roaming in the Deco app:
0HELPFULS
Forums/
Wi-Fi Routers
2021-04-27 17:21:22
@Kloveless The latest firmware added OneMesh: If you are not able to log into your router, you may need to factory reset it by holding the reset button for 15 seconds. Once you are able to log in,...
0HELPFULS