Forums/
Wi-Fi Routers
2021-07-19 13:14:31
@mbushnaq Not sure why you would have an issue. I did note that the following statement on the TP Link web site for that router: "Requires client device that supports 160 MHz bandwidth on Wi-Fi. The...
0HELPFULS
Forums/
Wi-Fi Routers
2021-07-19 13:05:34
@deboyer11 Once you turn on Smart Connect, any device that allows both bands (5G and 2.4G) that is on the WIFI network can be on either band.
0HELPFULS
Forums/
Wi-Fi Routers
2021-07-18 11:57:17
@Alex7777 I had lost the WAN IP a while back after a major power outage in our area. My ISP (Xfinity) says to power off the modem for 5 minutes when experiencing lack of service issues. I unplugged...
0HELPFULS
Forums/
Wi-Fi Routers
2021-07-18 11:40:44
@LeVeau The only time I disconnect the router from the modem to do a speed test is to check the difference between the PC-modem vs PC-Router-modem to see the impact of the router. I have found very...
0HELPFULS
Forums/
Wi-Fi Routers
2021-07-17 17:37:29
@LeVeau Remember that a speed test is between two different points. You are only as fast as the slowest link. Not sure which host (city) the router connects to to get the speed. I always use the ISPs...
0HELPFULS
Forums/
Wi-Fi Routers
2021-07-17 12:47:13
@swanem Some things to check. Check the modem for error codes about the time of the failure Check the router for error codes if it has logs. is the router running hot? Is there a lot of space for...
1HELPFULS