TP-Link CommunityKasa Smart SwitchesSmart Switch
Kasa Smart Switches

Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Smart Switch
Smart Switch
2021-01-30 22:02:36 - last edited 2021-01-30 22:04:11
Model: HS200  
Hardware Version: V4
Firmware Version:

My existing switch only has 3 (1 ground 1 black 1 white) wires, the smart switch has 4. How would I go about installing my smart switch?

  0      
0
#1
Options
2 Reply
Re:Smart Switch
2021-01-31 13:03:00

@JaredWhitt1 Connect the white wire from the old switch to one of the black wires on the HS200.

Connect the black wire from the old switch to the other black wire on the HS200.

Connect the white from the HS200 to the group of white wires in the box.

Connect the green wire from the HS200 to the green/bare wire in the box.

  0  
0
#2
Options
Re:Smart Switch
2021-01-31 15:03:24

@B.Will 

Thank you for replying. I figured it out after reading and researching last night. 

  0  
0
#3
Options

Information

Helpful: 0

Views: 47

Replies: 0