You can test it with two subnets (no VLANs, no bridges) on the Mikrotik connected to the TP-Link switch by two cables to two access (untagged) ports, one with PVID 1, the other with PVID 1010. If...

A mounting height of 2.40m to 3m and - if possible - free line of sight would be ideal. Higher mounting positions could enlarge the dead zone directly below the EAP110-Outdoor.

Dear TP-Link, I have three feature requests regarding the forum: If a file is attached to a posting and the posting is being edited, the attachment disappears. Work-around is to upload the file again...

akarpas wrote: so with this configuration ssid test gets ip form x.x.x.x/24 as well as taged 1010 test ssid gets ip form x.x.x.x /24 but suppose to get ip from a.a.a.a/24 I have even connected the...

Yes, VLAN setups can be frustrating, I know this from own experience. Two more tips: 1. Use an untagged ("Access") port on your switch/router to hook up the PC/laptop for accessing the web UI of the...

IMHO, you should not mix untagged and tagged traffic on a trunk if there are no good reasons to do so (e.g. it would only make sense if you have some legacy VLAN-unaware devices connected to a trunk,...