Dynamo wrote I used your installer, can i update to 3.0.5 using the tp-link linux installer, or would i have to wait for an update from you? (Still no 3.1.0 by the way, what would be the benefit of...

Hi jonas, thank you, that's an ideal solution!

jonas wrote As for the 1:1 aspect ratio issue, the reason why we keep the ratio is because it may cause some dispaly problem of images, such as white edge. Hello Jonas, thanks for coming back to this...

kiekar wrote With your suggestion I removed from VLAN 1 port 3 which resulted with the NAS device getting a dhcp ip address from pfsense of 192.168.30.65 but unfortuneately I'm unable to connect to...

This setup doesn't make sense to me. VLAN 30: Assuming the pfSense sends tagged frames into port 1 of the switch, those frames are forwarded by the switch to port 3 and the tag will be removed on...

Channel 5 is best. Channel width should be 20 MHz (meaning it uses channels 3, 4, 5, 6 and 7 if set to ch5 with 20 MHz channel width). Your antenna gain setting is wrong. Should be set to 15 dBi,...