RiversideCamp wrote There is clear Line of Sight between the devices. The first is mounted at approx. 15' agl, the second is probably closer to 11' agl, but not a huge difference. There are no...

RiversideCamp wrote I then took it back to the remote location, mounted it back on the roof, and ran Speed Test. I got a 47.9 Mb download. Then a minute later it was 1.7 Mb, then nothing. It now...

HendrixDJ wrote I enabled it by putty by showing me the message "Testmode Enable!" but it doesn't work I know that it once worked with CPE510 v2, but probably it was disabled in later firmware...

ForByGrace wrote The printers are in an office closest to AP 2, but occassionally they will jump to AP1. How do I assign them to only be on AP2 and never look for AP1? Assign EAP #2 a separate SSID...

JessieG wrote Would a wifi extender work with EAP? I do not recommend WiFi extenders/repeaters. Repeaters are not suitable for professional installations, they are guaranteed to cause problems such...

Powerauditor wrote Could it be that the EAP (or the controller) idles SSIDs in certain frequencies if there is no traffic? If so, why is the Guest SSID still on the same contant high level with no...