Hi @Matthewismyname, to use the CPEs in routing mode, you would need the clients to operate in AP Client Router mode. Note that the client's WAN then must be part of the same subnet the corresponding...

Hello @Lynild, I did a quick measurement of wireless speeds using NetSpot running on a MacBookPro 2016 model for EAP225 with following setup: 5 GHz band / 80 MHz channel width / n/ac-only mode. This...

Hello @Yao, thanks for your kind words. Yes, your products are a great help for us. By the way, we can also remotely manage the Pharos APs through a SSH tunnel, which allows remote access to the...

You're welcome, @Pattielee. If trying the router variant, remember to set up static routes between the two different subnets if hosts on one network should be able to communicate with hosts on the...

Pattielee wrote My AP is connected to my main modem/router at my house. Its sending a signal 800 meters away to the client. Client is receiving signal clear and strong. Then i plug in the omni...

Pattielee wrote Hi @R1D2 Thanks for the quick reply. Just want to clairfy...would i be connecting the router to the client or the AP? One of the CPEs must be running in AP mode, the other in client...