MattNZ wrote To me, this is a real issue of poor quality from TP-link. If you set up a unit correctly (UK location in my case), it should see other correctly set-up units without difficulty. I have 6...

Cloudbuster wrote i wonder if you see any speed decrease using the OC200 mesh. Every byte you send/receive from a mesh node must be transferred to/from the root node, too. Thus, as long as your...

@forrest surely will answer your questions, but give him some time – there are currently nation-wide holidays (National Days) in China until Oct, 8th.

Cloudbuster wrote when used as mesh do you still have separate Bands. 2.4 and 5Ghz with their own name? Yes, you can still use both bands. The mesh network will use the BSSID with a hidden ESSID in...

Click on AP in OC200, go to »Configuration« tab and click on »Forget this AP«. Alternatively, press the RESET button of the EAP for 7 seconds. For more info: RTFM (read the fine manual).

To force a device always connect to a specific EAP, just give the EAP another SSID and pair the device with it. You could also set up an additional SSID on a specific EAP for only those devices which...