Pharos CPEs can't be used with Omada Controller. Pharos products are used for directional links over very long distances. If you want to supply WLAN to client devices over short distances,...

@AndersG, the optimization of using fixed parameters is just to avoid too much negotiation between the two CPEs which happens all the time if using alternative modes (e.g. b/g/n, channel width,...

See this post.

AndersG wrote Does this look right? No. AP has fixed 40 MHz channel width, Client has 20/40 MHz setting. Always use the same settings for both CPEs. Also make sure to use WPA2-PSK/AES. 40 MHz...

Over 50m (you wrote ~300m first) a CPE sees even APs located in the opposite direction due to reflections. 50m is no big distance for a CPE. You could try to decrease Tx power on such a short...

Ehm, yes, the distance precision is 2 digits after decimal point for manual and 3 digits if set to »Auto«, sorry. »Auto« works the better the larger the distance; for very short distances it computes...