@malcoski, if I set a rate limit of 1 Kbps or 10 Kbps, I can't load any website at all b/c of timeouts in the browser. I can't even load my own website, which is plain HTML text, no Javascript, no...

@jaganraj, no. EAPs are just access points, they do not provide a repeater or client modes.

@malcoski, I guess that your smartphone probably wants to be super-smart by falling back to the cell phone network if the data rate over WiFi reaches a certain lower threshold. Next, web-based speed...

@MarcotteMW, for only two EAPs you don't need the Omada controller, except you would need meshing sometime later. As for EAP configuration I either use the built-in web UI of the EAP or in large...

AshleyNL wrote I did not remove the ports from vlan 1, could that be part of the problem? Unless you don't send traffic to VLAN 1 (by having an access port with PVID=1 or tagged traffic with VID=1...

Burczymucha wrote The PVID is by default set to 1 and this is what I'm using on all access ports (and to this VLAN belongs all untagged traffic). VLAN 2 is tagged for VoIP on access ports. That's a...