@Heujenthro, you need to set the IP of the system which you use to access the web UI. If you want to use more than one system for access, you need to use port forwarding on your router and insert the...

@Heujenthro, works for me. I can only guess since you omitted the most important information: what mode is the CPE running in? AP Client Router mode? If so, you probably forgot to set the Remote IP...

AshleyNL wrote My idea was to have the T2600 do the inter-vlan routing, but i'm getting exactly what you have, no connection between vlans.(directly I'm not sure what you mean? Inter-VLAN routing on...

@CTF, both CPEs are transmitting and receiving. They both need to send data to each other. If your question is which one should run in AP mode and which one in Client mode, the answer is: it doesn't...

@mazzinia, you're welcome, have fun with the switch! :-)

@AshleyNL, the problem I see in this config is that you let DHCP assign the IP (192.168.2.122 in your example) to the VIF for VLAN 10. How can you assure that the clients in VLAN 10 use the correct...