@skaterel, if you did set the switch to DHCP, find out the DHCP IP address it got assigned to by the DHCP server. You can connect to the switch using this IP address then. If that's to much hassle...

Hi @RTouris, when referring to iperf, I mean the standalone utility, not the CPE's built-in iperf. But as I said, antenna designs have greatly improved in last 5 years, so even with standalone iperf...

@arnie_s, that could be a reason – AFAIK the military in European countries uses the 5 GHz band for radiolocation services according to the European Table of Frequency Allocations, but no detailed...

delsystems wrote question: do i need controlller ever 1 or 2 eap 110 outdoor device only? Yes, for a portal with voucher authorization you need to run the controller 24/7. Consider use of an OC200 if...

Hi @RTouris, did you use iperf or a web-based speed test? In my experience only iperf gives reproducable results. If using speed tests on the web, make sure to always use the same test server (which...

@Cableguy78, yes, the RESET button of the power adapter does not work for EAP225-Outdoor, one has to press the button at the access point directly.