@LinkMeBaby, in my opinion this is how it is supposed to work. You resqeuence to make room between ACL rule IDs (set step width to 5 or so) and define a new one, then delete the old one, then...

XelNika wrote I am with you on the client isolation/ACL subject, but if TP-Link is going to do it wrong, they should at least do so correctly :P The wrong-doing is to implement certain policies....

XelNika wrote If this is TP-Link's reasoning (i.e. allow users access to their local DNS servers) then we have a different bug. The DNS protocol is not limited to UDP, port 53/TCP is used as a...

10148576 wrote How to use "tplink 1600G-28ps" to implement "one-arm routing to achieve communication between different VLANs on the same switch" You define the uplink from the switch to the router as...

@Don_A, OC200 needs a PoE adapter according to IEEE 802.3af PoE if you want to power it through PoE. Those adapters always have a voltage of ~48V and a power rating of max. 15.4 watts (including...

XelNika wrote @forrest Which features exactly? First of all, DNS also uses 53/TCP which is blocked. Second, there should be no need for DNS to connect to an AP. In my opinion ACLs and the Guest...