Hockeyfreak wrote That did not seem to work for me. It had no effect on the SSID "GreaseMonkeyCust" stop showing up after 1900. Works for me. Just in case: ensure that the EAP has the correct time,...

For EAP discovery you need to open TCP ports 29811, 29812, 29813 and UDP port 29810 in the firewall on the Controller side. If you want to use portal functions or if you need remote web UI access to...

@Hockeyfreak, I don't quite understand the problem here. To enable the radio for the guest SSID only between 07:00 and 19:00 you set »Radio On« for this timespan. If it is currently on, the setting...

@grayb, you can set up the CPEs in your office using one PC. The Client CPE already did connect to the AP CPE according to your first screenshot. The AP's web UI shows »Connected stations: 1« in the...

@grayb, you should set »Distance« setting to either »Auto« or to the actual distance. Also make sure the CPEs are carefully aligned to each other, this is important for directional links.

@grayb not sure what you mean with »Client does not work«. CPEs are for P2P links, this means yes, you usually connect the CPE operating in AP mode to a router (or a switch) and the CPE operating in...