NorthGraves wrote Default was (and currently is): 802.11a/n/ac mixed for 5 GHz; Channel width 20/40/80 Hz 802.11b/g/n mixed for 2.4 GHz; Channel width 20/40 Hz Both 2.4 GHz and 5 GHz are ON on both...

@MarkMeij, did you set up and enable the EAP's SSID by logging into the web UI the first time or if using the Omada controller did you define a SSID? If so, do you use non-standard characters in the...

@lester, yes. that's the chicken-egg problem. Two solutions: Use DHCP to assign the EAP an IP address. Adopt the EAP until it goes into »Provisioning« state. Wait until it becomes »Disconnected«. Now...

@German93, could be either a channel problem (CPEs support only outdoor channels) or a distance problem (too short). You should be able to connect with the client directly to the public AP over a...

@MarioT, you can use the MAC filter setting to restrict connections from the cams to the CPE. Find it in the »Wireless« menu:

@lester, what's the IP of your network?