@paparazz01, as you can see from the log, the adopt failed at all. Press the EAP's reset button for 5-7 seconds (not the PoE injector's button) until the LED starts to blink to restore factory...

@DanL, oh, I also did mis-understand this point. If you have just one pair of CPEs, you can use 40 MHz channel width. Anyway, mounting two CPEs of two pairs on two poles apart from each other won't...

MAFA wrote is it possible to put TL- ANT2410MO or TL-ANT2415MS on TP-Link EAP225 Outdoor?? No. TL-ANT2410MO frequency range is 2,35-2,55 GHz only, not suitable for 5 GHz.

DanL wrote - What mode should each CPE-210 be in? I assume AP for the one hardwired to the switch and Client for the "remote" one. JSchnee21 answered most of your questions already, here are some...

@paparazz01, for voucher logins to work you need Omada controller running.

Meow_Meow wrote I actually had a CF E312A as PTP and a CF EW72 and that I was able to use its bridge mode to allow vouchers and it worked, I was hoping that EAP 225 Wall could do the same with its...