Bongo wrote I had assumed that the TL-SG108E MTU VLANS were implemented by some type of switch feature that just prevented "isolated" ports from being able to transmit to another isolated port. Port...

AMOHAN wrote Issue is, with all devices connected, when I go to LAN --> DHCP Client, not all the devices are listed. Some of the devices are in the MAC-IP binding mode for address reservation and...

ciberw0lf wrote So I have 2 CPEs, one set as AP and the other as AP Client. I guess you mean »AP Client Router« mode. This mode is needed for WISP applications (see Operation Modes in the Pharos...

@FrankNeps, there is definitly a limit of the internal data structures; in most APs it's 256 (only the manufacturer knows). As for EAP245 the recommended max. number of users is 80-100, depending on...

mariem56 wrote My problem would be getting two VLANs from 1AP connected to TPlink Switch. TL-SG1016PE conforms to 802.1Q standard as do Cisco switches, but the TL-SG1016PE is an Easy Smart Switch...

@nyinyihan, you need to set the IP of the EAP before it can be adopted. Either try to set a static IP in the EAP's web UI and then adopt it (should work with latest firmware according to TP-Link) or...