TP-LinkOffline
Following: 2Followers: 308
Forums/ Deco
2021-03-15 06:47:51
Re:WPA3 on Deco X60
@Fabrizio1965 Hi, Since Deco M4 is not supported WPA3, only Deco X60, the WPA 3 security mode is still not available for the whole mesh system; Deco X60 could broadcast 802.11 n/ac/ax standard...
0HELPFULS
Forums/ Deco
2021-03-15 06:37:29
Re:Using a Netgear GS108E switch on data port of Deco M4R
@Jon1961 Hi, could you please provide me a picture of your network topology? Have you checked the IP address on the device connected to the switch when there is no internet? Thank you very much and...
0HELPFULS
Forums/ Deco
2021-03-15 06:29:54
Re:wifi channel
@Marvin101 Hi, I can see your current model number is Deco M5 which has supported the network optimization already. So Was your current issue that the network optimization did not stay on the clear...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-03-15 03:07:29
Re:MR600 V1 Firmware inadequacies.
@Denarius Hi, thank you very much for your feedback. Have you tried to change the DNS server on the Archer MR600 to have a look: Advanced>Network>LAN settings>primary DHCP server/secondary DHCP...
1HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-03-15 02:42:22
Re:External antenna and TL-MR 6400 router
@Kostas7 Hi, the TL-MR6400 v5 has 2 × Detachable External 4G LTE Antennas. Since we did not test the compatibility with different antennas, it is not suggested to replace the original antennas; And...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-03-15 01:47:24
Re: switch between 4G bands on Archer MR200
@cyriac Hi, it is under : Basic->Internet page or Advanced->Network->Internet page. And could you please have a check again? Thank you very much.
0HELPFULS
1387388389...