first you have to know the ip of your main router, example 192.168.0.1 if the third number is 0 in your router, 0 then you are in same sub-net, its always the third number the one you care for, and...

you posted The setup worked fine (i followed method 2 entering keyphrase and password for my network), Use method 1 Make sure you are in same sub-net as your main router and have latest firmware

the others are not problems, natural behavior of a repeater about Additionally, after installing the repeater my stationary wired PC attached to the mainrouter is kicked-off now every ca. half an...

as yopu post i scan two wifi signals... its normal using this mode what you can do about slow internet, change the channel in Wireless Basic Settimgs, for sure you have it in Auto thats why on post...

Simon wrote Try the following: http://www.tp-link.com/en/article/?faqid=463 on post #1 reads Reset to factory default, upgraded firmware to latest (Was already running latest... but just in case)....

your post i`m thinking to connect with lan cable the 5210 with the rooter then just do this. operation mode AP Acces Point, its chosen by default, just check and save Wireless basic settings ssid is...