Smart Home Community > Tapo Smart Camera > NC450 Can't change http port
< Tapo Smart Camera

NC450 Can't change http port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NC450 Can't change http port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NC450 Can't change http port
NC450 Can't change http port
2017-08-26 04:28:44
Model :

Hardware Version :

Firmware Version :

ISP :

I need to change the http port from the default 80 to 2020 so that the camera can work with my Synology NASs Surveillance Station software.

When I log into the cameras IP address and go Advance > Network and edit the port number it errors (well it calls it TIPS and not an error) with "This port has been occupied by the system".

What does this mean and how do I get around this issue?

Thanks in advance.
  0      
 
  0      
 
#1
Options
4 Reply
Re:NC450 Can't change http port
2017-08-28 10:13:36
A server in your network is using the port 2020. You need to find out what it is. Or change another port.
  0  
  0  
#2
Options
Re:NC450 Can't change http port
2017-08-30 01:39:01
I have just used Network Utility (in mac os) to do a port scan, I tried the various devices on my network without success and then just out of interest did it to the camera and voila:

Open TCP Port: 80 http
Open TCP Port: 554 rtsp
Open TCP Port: 1935 macromedia-fcs
Open TCP Port: 2020 xinupageserver
Open TCP Port: 8080 http-alt
Open TCP Port: 8081 sunproxyadmin
Open TCP Port: 8088 radan-http

The camera is using the port for "xinupageserver". What is this and how would I open up that port so I can us it as the cameras http port (currently set to 80) so that Synology Surveillance Station can see the camera.
  0  
  0  
#3
Options
Re:NC450 Can't change http port
2017-08-30 02:07:49
[COLOR=#303030][FONT=monospace]I used Network Utility (mac os) to do a Port Scan on each device on the network without success and then just out of interest did it to the camera and voila:[/FONT]
[COLOR=#303030][FONT=monospace]
[/FONT]
Open TCP Port: 80 http
Open TCP Port: 554 rtsp
Open TCP Port: 1935 macromedia-fcs
Open TCP Port: 2020 xinupageserver
Open TCP Port: 8080 http-alt
Open TCP Port: 8081 sunproxyadmin
Open TCP Port: 8088 radan-http

The camera is using the port for "xinupageserver".

I just now need to figure out what is this and how would I open up that port so I can us it as the cameras http port (currently set to 80) so that Synology Surveillance Station can see the camera.
  0  
  0  
#4
Options
Re:NC450 Can't change http port
2017-08-31 09:17:37
I was told the port 2020 is not occupied by the camera system. Can you change the port on the synology serveilance station? If you really need this port 2020, then contact support@tp-link.com
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 7

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.