I m trying to create a voice vlan for a static ip using the omada controler but the guide in the site can't help me because I can't find a QOS tab in the controler pages. Till this point I have done t

Yesterday's (May 21 2021) firmware update for the SG2210MPs and SG2008P caused switches to start bouncing up and down. Had to remove (disconnect) physical wires from ports that were redundant or loops

If I want to create more than one rule it says "Only one DMZ rule is allowed for one WAN port." despite the DMZ option not being selected. Also why is the Source IP option limited to 5 entries?

Hey, gang. I'm running the latest version of the controller software. Using THE Tp-Link router and an Omada managed switch. If I visit any of the usual internet speedtest sites on the Windows PC that

Hi, I'm new to this network setup but have the SG2428p switch with 3 eap225 and oc200 controller all set up and adopted fine, with the er605 providing DHCP and the isp's router in bridge mode (done by

When I configure PoE schedule on a port in a specific time, this port is enable for this specific time. I think there is a mismatch about this: It happens the opposite