Hi All Total newbie here so my apologies if this sounds like a stupid question. I currently have 1 x EAP225 at home that I configured using an app on my iPhone. The EAP is powered by the POE injector

Hello, From what I can tell from the datasheet I should be able to setup and create a mesh network with these AP's. I have mesh enabled in my controller and my AP's adopted and connected. Here are the

Hello together I have the following problem: I have a test environment which are all in the same VLAN (physical server which is connected to port 22). All test servers are virtualized via Hyper-V. The

I've set up my shop such that different areas have different APs and WLAN groups. For example: Area A, EAP A, wlan group A: wifi_shop (default portal/voucher), wifi_otherA Area B, EAP B, wlan group B:

Running OC200 controller with a release 1 prior to latest (had issues where latest would not let me assign static IP's to devices.) I have my environment up and running with TL-R605 as router, 24 port

Hi All, After failed upgrade of ER7206 to V1_1.1.0_20210531-rel64940(beta) the device went to disconnected status on omada, and LEDs didn't light at LAN ports. I've tried to use the emergency mode to