@DimitriosM Hello, Thanks for your photo, sorry to say that, but it looks like PA7010 is totally dead after firmware failure. As far as I know if wrong firmware is loaded, this may affect the product...

@BSP-Tech @Emad1973 Hi everyone, Sorry for the delayed reply. Here is the beta firmware for TL-WA901N V6 for login issue on a different VLAN that @lakesol mentioned, please give it a try:...

@Domly Hi, As some of your devices will not accept router password, please contact Router support first and your Wi-Fi password or change router's Wi-Fi password back to the original one. If you have...

@Smithmyster85 Good day, Please disable power save on powerline device first: https://www.tp-link.com/support/faq/2018/ When PA4010 lost no power, does it properly connected to the wall socket...

@Onurk Hi Onur, Thank you for valuable information. If Wi-Fi connected but no Internet, please log in to tp-link management page, and change the Wi-Fi channel to1.6.11; Channel width to 20Mhz and see...

@AlanG79 Hi， It is recommended to unlug AV600 and plug AV1000 to the same wall sockets that AV600 were using to do Iperf and see if speed could better. If still not good, may I have a photo of your...