Hi @Lardo5150, I should add that -70 dBM or stonger (e.g. -65dBm) is a perfectly good signal. Even -75 to -80 is useable. Max signal is roughly -30 to -40 dBm. But what really matters is the RSSI...

Hi @Lardo5150, Welcome! Just to take a step back. Can you clarify how many how many total access points you plan to install and how many floors your home is? Are you planning to hardwire (Ethernet)...

Hi @Byteguy, How many root nodes do you have? Just one right? Is your CPE the 5.8GHz version or the 2.4GHz version? The way that the TP-Link MESH works on the 225 series is that all of the wirelessly...

Hi @Byteguy, What you did is correct. The global throttle does not effect the negotiated air rate between the AP and STA's. It only throttles the data passing through. You won't see any effect until...

Hi @TomMunk, Which speed test are you using? iPerf or an internet based one? (e.g. Ookla, Fast.com, Cloudflare, etc.) How fast is your broadband connection? It sounds like you're pretty tech savvy,...

Hi @RoyvO, I've heard there is a Beta firmware you can use on the 245 to support MESH. The official firmware for the 245 (V3) with MESH support was supposed to have been out by now. I'm not sure what...