Your picture shows it very clearly: the EAP is connected to the switch over a trunk carrying both VLAN's traffic, this means data packets including the VLAN ID. The switch then can separate and...

You separate traffic by assigning a second port on your switch (or router) to VLAN 100 and a third one to VLAN 200. For a sample setup of VLANs see the paragraph about Multiple SSIDs here:...

Just to be sure: did you have selected "indoor" for the distance setting on the WA7210 (menu "Wireless -> Distance Setting")? This should be selected if used indoor. Anyway, what you are experiencing...

markuss wrote EDIT: OK the TL-ANT2412D and TL-ANT2415D are not what I had in mind, they are 1,5m long :-) I thought about using some much smaller antennas about 15cm long. You could connect an...

vijayphadke wrote Perhaps version 2 will have but not sure why customer support said it has, perhaps they menat v2. Yes, they meant HW v2. It's out by now, see...

pstein wrote What is the difference between v3 and v4 of model TL-WA901ND? Is there a side-by-side comparison table? Peter V3 has an Atheros AR9341 CPU running at 535 MHz, while V4 uses an Atheros...