nfh wrote Can the RPI somehow flood the AP in such a way that it renders it inoperative? Sure, if it is mis-configured in some way, it can flood the AP.

What's more, CPE510 has only 45° antenna beamwidth, while CPE210 has 65°. With my 5 GHz-capable tablet I can even get a WiFi signal when standing behind or at the side of a CPE210, but I don't see...

Traxxas wrote WNR3500 DHCP Range: 192.168.0.1 - 192.168.0.254 so CPE IP is in the range since the beginning That's bad, CPE should have a static IP. Leave some room for static IPs, e.g. set DHCP...

Wrong gateway in DHCP settings. Your gateway is 192.168.0.1. DHCP on CPE must be off. DHCP on Archer in router mode must be on. Archer's LAN and PCs are in a different subnet then. The CPE and its...

paradise9 wrote I tried a factory reset, used the old IP address 192.168.1.254 and am still not able to access web management. The IP address after factory reset is 192.168.0.254, not 192.168.1.254.

Traxxas wrote It this possible with only one CPE210 at the 2nd House connected to archer c7? No. The CPE needs another CPE for a reliable long-distance radio link. The Archer C7 is not capable of...