Do your mobile phones support 5 GHz? Do they connect if CPE's channel width is limited to 20 MHz (some client devices have problems with 40 MHz channel width)? Are you in the range of the CPE's WiFi...

Efexs wrote The EAP and the EAC controller ar ein the same subnet? The EAC is not required to be in the same subnet as the EAP for adopting it. It can be in any network as long as TCP ports 8088,...

Efexs wrote To get web interface you need to close eap controller You need to forget the EAP managed by the controller in order to re-activate its web UI. Closing the controller will not...

geodou wrote In other words, may the antenna works as receiver and transmitter Wi-Fi simultaneously? CPEs are either for directional point-to-point (PtP) links (CPE to CPE) or for...

RONALDO wrote Can I connect the Device to a PoE switch without the Power Injector ? No change. PoE-capable switches use 802.3af or 802.3at PoE (48 volts), but the CPE needs passive PoE (24 volts). It...

Johnsontp wrote Update to Pharos 2.0 http://static.tp-link.com/TP_PharOS_2.0.0_161117.zip Does not help either. Region selection is disabled in the ART partition of V1.1 hardware.