cayvman wrote However, when I connect the router to the modem and then the cpe210 to port 3 of the router, it's showing ip192.168.0.xx as the address. So, I tried other ports on the router, knowing...

cayvman wrote Agreed only one interface, but how or where would I assign that interface with a ssid? In wireless setting you should be able to assign the SSID with a network ( GLAN or whatever you...

Lucas Machado - Prolux wrote Does anyone have this information? Yes, the data sheet has this information. Power Supply: 100-240VAC, 50/60Hz...

RTouris wrote Fiddled around w/ settings, let it renegotiate for about an hour, yet still a no-go...Last attempt will be moving client CPE to very close proximity to AP CPE... Weird. Did you try to...

lapioks1 wrote Yes I can reach web UI after power cycle. To me it looks like DNS problems, but not from main router side. Is there a specific reason to use AP router mode instead of AP mode if you...

cayvman wrote Question is if I telnet the router and send the following command nvram set vlan3ports="3" how should I complete the following command: nvram set vlan3hwname=?. Should it be br1 or...