cayvman wrote If I understood previous advisements, LAN should be eth1.01 and when I create a Guest VLAN it would be eth1.02. Is that correct? No, eth0.1 is LAN, VLAN ID is 1. eth0.2 is WAN, VLAN ID...

w20grippy wrote Could a directional antenna work in that case? No, as long as the remote device doesn't also use a directional antenna in a fixed position, they won't help, but would make the problem...

I see. Kind of a Windows compatibility mode. However, the EAPs run 24/7 without any reboots constantly and stable, at least for me.

I have no idea what you are observing and what in this respect should be "normal" or "recovery time", but if I enable Loop Detection on my TL-SG108E and create a loop, it blocks the port with the...

RTouris wrote It's MCS 8-11 that's missing, same on all 6 of my CPEs so far, including v1, v1.1 and v1.1(EU) hardware. Ah, I see, didn't read carefully. :o Maybe they are not implemented b/c speed is...

baldog wrote MCS channels 8 - 11 aren't available however MCS 3 is which i'll give a go tomorrow. MCS is speed/modulation index, not channels. This are my choices of MCS for n mode or a/n mixed mode...