mixawy0 wrote ps. the downloadable fw is missing bootloader No. The boot loader of any device should never ever be touched. That's BTW the big mistake the OpenWRT firmware did in first place! I have...

Leave the CPE in default AP mode, and connect the LAN port from the PoE injector to one of your router's LAN ports. Before doing so, set a static (fixed) IP address on the CPE, so that you can still...

marcodd3 wrote What should I change to monitor it again ?? Set a static (fixed) IP from your subnet in the CPE. By default it is configured to use DHCP, which means it get's a dynamic IP - most...

Heri wrote But when i use test Mode,i only use normal channel ( 1-10 chanel ) but still, all client will be DC is there any some bug according to test mode condition..? Test mode will give you...

beamboy wrote Most of the mobile/laptop connections will be from (A) to (B) which is 10-15 metres and (B) has LOS to (A) through the front of the rooms. That could be o.k. I used a WBS with a sector...

Of course the setup Johnsontp suggests makes sense. What does not make sense is to try to feed smart phones over 60 meters with walls in between. It's a common error to assume that a single fat...