You need to open the EAPs for client access to those auth services, for example with a free authentication policy in EAC. But it's no ideal solution: if IPs change, you have to change the ACL rules,...

RTouris wrote I'm familiar with the Hidden Node Problem, but I'm willing to go fwd as CPE#3 has no real challenging setup / requirements and it occasionally needs internet access. I'm not sure I...

V1 hardware of this switch has no web UI. The web UI was introduced with hardware V2. If you got an error during upgrade, it means that you tried to update wrong firmware image. If you see the error...

RTouris wrote CPE#1 has no LoS to CPE#3 O.k., then I am pretty sure that your setup hits the hidden node problem. Either change the roles (CPE#1 in client mode <---> CPE#2 in AP mode <---> CPE#3 in...

RTouris wrote On the quote bolded out above are you referring to: a. the wireless client settings SSID that the root AP broadcasts in order to achieve naming parity (keeping the same locked MAC...

Same findings: Disabled MAXtream on main AP, set to fixed channel 100. Apply, save config, reboot. Enabled AP on bridge CPE. Apply, save config, reboot. Connected immediately. First test: Fixed...