Yes, this can be the cause for the bad latency. If there is not enough AirTime for the EAP to allocate the channel (because other devices are sending at the same time), latency usually increases...

Not sure what you mean with "instabilities". Do you mean high latencies instead? If the latter, there can be many causes, such as interferences in a dense-populated 2.4 GHz band, collisions of radio...

bubas wrote 1-Do you have any ideia of the range with this antennas ( TL-ANT2408CL) Depends also on the remote's antennas. With CPEs 200 meters should work, with TL-ANT2424B I could connect over 600...

Heri wrote i already use hard reset,but still there is country option on first login page, and also on wireless tab inside See...

Heri wrote Same problem with me...is there any way to set more then 11 dbm..? You have to add the antenna gain to get the total radio emission power. I.e. 11 dBm TX power + 9 dBi antenna gain equals...

Boris01 wrote Gentlemen: it continues to malfunction, a few moments ago it happened again, it simply connects and disconnects all the clients, continue until you restart it. Again: if you use...