tbonecopper wrote AHA! Thank you. That makes more sense. I thought out of the box the APs would be seen immediately by the controller software! Thank you very much. Yes, they are immediately seen by...

Find the menu for "Internet Protocol Version 4 (TCP/IPv4)" in the network settings of your PC, click on "Properties" tab, which should show you your PC's IP address. Add the IP of the router in the...

schlumpfen wrote is it possible connect two EAP245 without LAN connection? No, not possible (currently). They are just APs, not repeaters.

tbonecopper wrote What's the trick to get them to work? If you already did configure the EAPs, you did place them into stand-alone mode. Use the discovery tool to connect them with the EAP controller...

If you use a static IP for your PC, make sure there is a default route to the gateway router (192.168.0.1) and a DNS server's IP set (most often the same IP of the router or use Google's DNS, which...

If you use a Unix-like server, see: http://help.papertrailapp.com/kb/configuration/configuring-remote-syslog-from-unixlinux-and-bsdos-x/ If you are using Windows, I don't know wether it can receive...