beamboy wrote Thanks again for all your advice, I have decided to go with the following configuration, hopefully it will work out well.. B) WBS210 + TL-ANT2415MS C) CPE210 (pointed LOS at...

sk11 wrote The differences this time were leaving wireless vlan ID as 0 and leaving load balance OFF. Not sure why those 2 would cause IP issues. See post #2. If you use Multi-SSID VLANs (i.e....

sk11 wrote No, just created multiple SSIDs and passwords. Should work if your DHCP server is up and running. Tested it and it works on my EAP. Double check the static IP of the EAP. If you can't find...

speedAmaster wrote On my small switch TL-SG108E it was easy and the basic configuration let the managed switch just start working as an un-managed one..... So does the T2600G in basic (factory...

sk11 wrote 4. configure multiple SSIDs 5. connect devices to the AP using the newly-created SSIDs How did you set up the Multi-SSID feature? Using VLANs for network segregation?

So what do you mean with "policy ... not LAN to LAN"? Are the EAPs able to send UDP/TCP traffic to the mentioned ports on your PC or not?