Setting up the CPE for house C in AP Router Client mode alone will by no means isolate the main subnet from the one used in house C. Any device in house C's network still can reach any other device...

RTouris wrote One more thing I just noticed is that in performing any speed test between two CPEs that are quite afar away with lower connection throughput (~20mbps) due to the time it takes for the...

beamboy wrote 1) if I mount cpe210's on the outside of the building will they work in client mode to feed the TL-WR841HP V3's via cable inside without MaxStream? ie. does the wbs210 act as an ap for...

I got the statement through official TP-Link support, which has the line to the HQ, but authoritatively the statement was from HQ's engineering. I really hope they support the previous versions in...

AFAIK, OpenWRT does not actively support switches except the ones built into WiFi routers. But you can download the core source code for the T2600G here if you want see for yourself what SW is...

You don't need Internet connectivity to connect to the CPE's web UI. Just make sure to set a static IP and to have your laptop/PC connected to the CPE directly ( not over the network, since...