If you use a static IP for your switch, you could (indirectly) select the VLAN for mgmt. But you're right, the Easy Smart Switches should allow for a mgmt VLAN and get rid of that fixed...

nokut wrote M Is there a way to set this up inside PharOS? Or do we have to configure the Switchports themselves? No, the CPEs don't support link aggregation in Pharos. You would have to set it up on...

penkomitev wrote I would like to ask a couple of questions. Since the units are 300 Mbps, I am able to reach only 11 Mbps when the traffic is hot on the network(video streaming). If there is no load...

The devices do not upgrade by itself. But under Windows, alls sorts of indeterministic weird behavior is absolutely normal.

ESD can be the reason for all kind of malfunctions, such as those you described. It does not always kill the device, but can force it going into weird states, too. If the mast is grounded, a GND wire...

Just out of curiosity: did you install a cable with lightning/ESD protection or an earth-grounding strip directly to the CPE? If not, electrostatic discharge could have destroyed the CPE.