Selecting just an authentication scheme for the Captive Portal on an EAP does not make your network a »walled garden«. It's only half the work. The other half is to build an isolated guest subnet on...

pengwan wrote Your suggestion is great, will look at having a pair of CPE510 from base to each AP's location and add another EAP110 each, maybe will reduce the number of stations to 2 instead of 3...

The EAP245 consumes max 12.7 watts. Max. power for 802.3af is about 12.5 to 12.96 watts depending on the cable length. Therefore you should better use 802.3at, although it could probably work with...

winstar wrote Thanks R1D2 for your detailed explanation,while I am wondering what on earth would happen if the power of the CPE is rather high? Will it damage the Wi-Fi receiver of iPhone? Or just...

The EAP110-Outdoor does not support repeater mode. The CPE210 does, but the CPE is meant for directional links and therefore has directional antennas with a beam width of 65°, not omnidirectional...

Inter-VLAN routing requires a router or a layer-3 switch. The TL3424P is a layer-2-switch, so you have to add routes from VLANs 100, 110 and 117 to VLAN 1 on your router the switch is connected to.