TPTHZ wrote I remember the old tp-link media convertor supports 5V and 9V at the same time, But the new hardware version may not. Are you sure? The data sheet for the MC110CS V6 still lists 5V or 9V...

satfee wrote If you like 2 or more VLANS you must make this, port 1-24 all PVID1, VLAN2 port 2-4 PVID2, VLAN3 port 5-8 PVID3. This allow all ports from 2-8 to connect with port1, router, but port 2-4...

First of all, you don't need the EAP Controller to install EAPs. The EAP Controller is a management utility for installations with many EAPs and it is currently available only for Linux and Windoze,...

irvgharrison wrote Problem is that I can't get into the web-based management system for the switch (not sure what IP address to use for a start and none of the common ones have worked..or just go to...

You need to create an isolated guest subnet in addition to your internal network. There are different ways to achieve that, I usually create such guest networks on the router. VLANs are then used to...

MichaelL wrote I'm having trouble figuring out why i'm not able to get my unit to power on with the ethernet cable to my router, as a PoE solution. You need either a PoE-capable switch (such as...