Barely it is done right, it works. Surprise! ;)

superczar wrote There are other folks as well on the Ubnt forums complaining about 40mhz channel width not working with client devices with Ubnt radios in AP mode.. In all honesty, not at all...

Ok, now it's clearer. First of all, update the firmware of the CPE210 v2. Latest firmware is TP_PharOS_V2.1.0_170609. I assume you are in the EU? If so, you can download from here (else see your...

Generally, 1000BASE-X SFPs should work in a SFP+ port. Since SFP+ GBICs can't work with 1000BASE-X SFP GBICs on the other side of the fiber, the T1700G's SFP+ port must support SFP GBICs, too, since...

1. Do a factory reset on the switch. 2. Set your PC to the subnet 192.168.0.0 (e.g. set fixed IP 192.168.0.20). 3. Start a browser (Firefox, Chrome, Opera). Clear the browser's cache. 4. Load the web...

markgraham wrote I do want to set up an AP - Client pair, but found that running AP with 27dbM and even 11dbM wifi the unit stopped communicating as described. So I tried to see if it was due to the...