The switch's port 4 and the router's port need to be tagged ports. PVID=1 for port 4 on the switch will still supply your novlan SSID. The router needs to provide DHCP for novlan (VLAN1, untagged)...

WBS210 is an outdoor base station mostly used for long-range links with sector or dish antennas. Are you using the WBS for its PPPoE feature in AP Router mode (b/c you have a modem connected to it)?...

Support wrote Clients on an SSID bound to an interface using VLAN1 do get DHCP responses and an appropriate IP address, so the issue seems to be VLAN oriented VLAN1 is the default VLAN, so traffic is...

alfwro13 wrote Is that how you justify yourself for using insecure products? You are completely missing the point. You claim that the SSL weakness of an AP's web UI would enable "someone to snoop on...

yandoo wrote got any link for the firmware? only shows 2.1.0 on support page See http://www.tp-link.de/download/CPE510.html#Firmware Note 1: I'm not sure wether it is only for EU devices, but since...

If your Pi2 router outputs tagged Ethernet frames for VLAN 40, you would need to configure port 8 of the TL-SG108 as a tagged port. To do so, click on the symbol for port 8 under "Tagged Ports" and...