You could either use two CPEs connected together by wire on top of the hill as a relay or consider use of WBS210 with an omnidirectional antenna TL-ANT2410MO. However, this antenna is not (yet)...

Hardware version is important to answer which firmware you need. Find the HW version on the label near the connectors.

lexxai wrote All that can engineer do it post new firmware, where will be blocked store in configuration file information about VLAN1. And in future trick with change configuration file will be...

Again: you are not assigning IPs to a VLAN. You cannot assign IPs to a VLAN, that's impossible. You assign IPs to an interface into a VLAN. A switch's interface is not the VLAN, it's an interface,...

rodhzuniga wrote good idea the eap110, with an omnidirectional antenna, how much range will 360? Theoretical up to 200m, in practice 100m to 150m if you use 802.11n mode (also depends on client...

CPEs haben Richtantennen mit einem relativ schmalen Abstrahlwinkel von nur 65°, daher wirst Du mit Standard-Geräten nur in sehr engen Grenzen Empfang bekommen. Diese Grenzen lauten: 1) Entfernungen...