Forums/
Pharos Wireless Bridges
2018-01-15 02:12:02
danieltan wrote Anyone can help me?? why the connection drop (TX and Rx rate drop) when I using wifi router.. Your WiFi router operates at channel 11, the directional link uses channel 8. This...
0HELPFULS
Forums/
Pharos Wireless Bridges
2018-01-15 02:01:22
The TL-ANT2415D is not suitable for a distance of 1km. It's an omnidirectional antenna, not a directional antenna.
0HELPFULS
Forums/
WiFi
2018-01-13 05:05:04
LucasOliveira wrote I go try use the private Mib, but the oid iso(1).org(3).dod(6).internet(1).private(4).enterp rises(1).tplink(11863).ap(10).eap(1).clientStatis( 1).clientCount(1); don't work. Try...
0HELPFULS
Forums/
Pharos Wireless Bridges
2018-01-13 04:58:55
A CPE starts upgrading only if the firmware has been completely downloaded to it. So it should not do any harm if you PC freezes as long as you don't turn off power of the CPE.
0HELPFULS
Forums/
Business Switches (Standalone)
2018-01-12 05:47:20
The router needs to provide DHCP for all other devices if you don't use static IPs in your network. The switch cannot provide DHCP, at least not the TL-SG105E. If your network's IP range is different...
0HELPFULS
Forums/
Pharos Wireless Bridges
2018-01-11 23:20:10
CPEs are designed for directional radio links. Their two antennas are directional, meaning their beam width is 65° (H) / 35° (E). To cover an area all around (360°) you would better use an outdoor...
0HELPFULS
