Mishkad wrote 802.1Q PVID Setting Port 1,2 both set to 34 Set PVID for trunk port 1 to 1, not 34. The TL-SG105E is Hardware version TL-SG105E(UN)_v2. and has latest firmware, version...

antonioninato wrote i did upgraded the firmware because i had the reboot of death and at first i thought that the unit was damage but when i switch mode then the problem disappear then i find out...

The Riddle wrote i suspect some sort of conflict but how is it possilbe is DHCP are active only on main modem (which IP is 192.168.1.1, while AP2 has 192.168.0.254 and C station 192.68.0.253, but...

You're welcome. Glad it works and now by having solved this you are no noob anymore! :)

You're welcome. iperf is the standard method to measure throughput in TCP/IP networks. Current version is iperf3, see http://software.es.net/iperf/

First of all, in bidirectional links there is no such thing as "Transmitter" and "Receiver". Both CPEs are transmitting and receiving, albeit not at the same time. Next, the AP router mode creates a...