The limit varies between 1-99 depending on your setting under "load balancing". If left blank, I assume the hardcoded limit is 99. However, this does not mean that 99 users can actually use the...

You design two network topologies, one private (let's call it LAN) and one for guests (called GUEST). You need either a router capable of creating two networks (LAN, GUEST) in addition to the WAN...

I still don't get your problem, sorry. If there is a shared portal/auth service you have to access from all subnets (VLANs) you just create another VLAN for the auth service only. In fact, I just did...

The bandwidth graph on the AP's status page shows a completely saturated network connection (46 kbps RX vs. 0.5 kbps TX). Looks pretty weird to me. Something in your network is hammering the CPE to...

kimmo wrote Anything special in configuring the wireless router? No. But the CPEs should be tuned in PtP topology: 802.11n fixed, 20 MHz (CPE210) or 40 MHz (CPE510), short GI, WMM enabled, distance:...

pcoluna wrote Today I bean aware that one house (House A) is not in line of sight with the reception, but is in line of sight with another house (House B). What implementation/equipment can I use to...