asepsunara wrote thanks R1D2. You're welcome. Did the latest firmware solve the problem with disconnects?

rcmpayne wrote So from watching a few vids and docs online, PVID is the default vlan assigned to any non-aware vlan device (vlan 1 in my case) and that when you have a device that can be configured...

You need to create a trunk (tagged) port on the switch for pfSense and the UniFi and an access (untagged) port for your PC. Assign PVID 2 to the access port and let PVID 1 assigned to the trunk port.

asepsunara wrote I have the same problem. WBS210 v1.2 mode Access Point. last firmware v2.1.6 Latest firmware for HW v1.x is Pharos v2.1.12. If not available on your country's support site, use the...

The PC running the Discovery Utility and the EAP must be in the same subnet in order to be able to add them manually. The server running the Controller must be reachable from both, but needs not...

Yes, if you create a separate subnet for the APs on the pfSense server and use VLANs to connect the devices to this subnet. To be able to do so, yout must configure the pfSense to either use VLANs or...