Andone wrote I think you can disable DHCP server on ER6020. Enable DHCP server and set up L3 interface on T1600. Hello Andone, T1600G switches do not offer a DHCP server, at least mine does not (HW...

Yes, Multi-Nets-NAT is TP-Link's terminology to describe an additional subnet and network interface on their routers. Multi-Nets-NAT will create another subnet and uses routing to reach those subnets...

V_M wrote Both vlan are in the same IP subnet. Therefore, I can not create another interface. Then either split the IP subnets (e.g. split subnet IP 192.168.1.0/24 into subnet IPs 192.168.1.0/25 and...

Do I have to buy SPF cables for that (and how much)? Can I do It using copper cable? No. You can use any port and cable (RJ45 copper, SFP/fiber, SFP/copper) to connect two switches together. If the...

alainb wrote Is it possible to create a vlan 192.168.253.* on the t1600g-28ps and to put a cable from vlan 192.168.252.* to 192.168.253.*on t1600g-28ps, and to define a gateway from 192.168.252.1 to...

vonTinzenberg wrote The General Data Protection Regulation of the EU states in Article 17: Right to erasure (‘right to be forgotten’) 1. The data subject shall have the right to obtain from the...